您好,欢迎来到三六零分类信息网!老站,搜索引擎当天收录,欢迎发信息
免费发信息
三六零分类信息网 > 马鞍山分类信息网,免费分类信息发布

金属充气泵 车载充气泵

2021/1/15 21:29:48发布91次查看
packaging & deliverypackaging detail: each put into color box; 12pcs in a carton;42.5*42.5*34 cm; 20'container can contain 5000pcs;
delivery detail: within 35 days after receipt of the deposit
specificationscar air compressor
power:150w
voltage: dc12v;
max pressure:150psi;
output volume:45l/min
new vibration-proof multi-functional air   compressor                                                                                                                            
configue:led flash light,3pcs of nozzle adaptors                                                                       
illuminate voltage/power:12v 10w;
instructions:
1> with the crocodile clip;
2> built-in switch and gauge
3> with inflator nozzle and sports needle
4> proper design for installing hose and cord
5> ideal for inflating all vehicle tires and other high-pressure inflatables
6> it is good for the emergency needs when you are on highway and country side road rushing for office on the morning while the tire is at a low pressure. 
operating the compressor:
step 1:pull out the air hose, make sure the nozzle lever is in the up position.
step 2:place the nozzle over the valve stem of the tyre or other item you need to inflate.
step 3:lock the nozzle to the vale stem by pressing down on the lever.
step 4:switch the compressor/spotlight switch to the compressor position to turn the compressor on. monitor the pressure gauge carefully.
step 5:when the desired pressure has been reached press the compressor/spotlight switch to the off position to turn the compressor off. disconnect the air hose and replace it inside the unit.
note:
sometimes, when the tyre is completely deflated, the seal between the tyre and the rim can be broken. this allows the air to leak when you are using the compressor. to fix this problem, you have to jack up your car prior to inflating the tyre.
to inflate other articles, select the appropriate nozzle adaptor and insert it into the nozzle at the end of the compressor hose making sure that the nozzle lever is in the up position. press down on the nozzle lever to lock the adaptor into place.
for spots balls, the needle should be moistened before inserting it into the ball valve.
caution:
bursting items can cause injury so don't exceed recommended pressure levels.
contact person:ruby
tel:86-18395819223
skype:ruby.niu1
email:info@nblcdq.com

宁波龙辰电器有限公司

18395819223
中国 宁波
马鞍山分类信息网,免费分类信息发布

VIP推荐

免费发布信息,免费发布B2B信息网站平台 - 三六零分类信息网 沪ICP备09012988号-2
企业名录